Leaf Stopper DEKGUARD - Lysaght - Flatdeck II

Gutter Guard for Lysaght Flatdek II Roofs

LeafStopper DEKGUARD is a gutter guard system designed specifically for Lysaght Flatdek II roof profiles.

The DEKGUARD system uses the patented Gripit fastening system to secure the Mesh Shield to the flat section of the roof profile where traditional corrugated roof saddles are not suitable.

This product is designed to suit the Lysaght Flatdek II roof profile with a 45mm rib height and 620mm cover width. Flatdek II is commonly used on patios, verandahs, carports and home improvement projects where a flat, ceiling-like appearance is desired. :contentReference[oaicite:0]{index=0}

Flatdek II requires approximately 10 Gripits per metre to support the Mesh Shield correctly along the roof edge.

Compatible Roof Profile

• Manufacturer: Lysaght
• Roof Profile: Flatdek II
• Rib Height: 45mm
• Cover Width: 620mm
• Gripit Requirement: 10 Gripits per metre

Why Flatdek II Requires DEKGUARD

Unlike corrugated roofing profiles, Flatdek II features broad flat pans and a concealed ceiling-like underside. Traditional corrugated roof gutter guard systems are generally unsuitable for this style of roofing.

DEKGUARD uses patented Gripit brackets designed specifically for flat-based roof profiles.

Gripits secure the Mesh Shield directly to the flat section of the roof sheet, helping create a secure installation while maintaining effective rainwater flow into the gutter.

The Flatdek II profile requires approximately 10 Gripits per metre to provide the correct support and attachment points along the roof edge.

About the Lysaght Flatdek II Roof Profile

Lysaght Flatdek II is a long-span roofing profile commonly used for patios, verandahs, pergolas, awnings and carports. Its distinctive flat underside creates a clean appearance without exposed roofing ribs. :contentReference[oaicite:1]{index=1}

If you're searching for gutter guard for a Flatdek II roof, DEKGUARD provides a purpose-designed attachment method that allows Mesh Shield to be securely installed using the Gripit system.

Watch: DEKGUARD System Overview

Watch: How Gripits Work

Watch: DEKGUARD Installation Guide

What Comes in the DEKGUARD Kit?

• 250mm wide Mesh Shield roll in your selected kit length and selected Mesh Shield option (Standard, Premium or Fine Mesh)
• Trimets – used to connect the mesh to the gutter edge using hexagonal head screws
• Gripit brackets – the quantity required for Flatdek II is automatically calculated when this roof profile is selected
• Colour-matched screws to match the Trimets and Gripits
• 1 FREE socket included with your order for hexagonal head screws

Mesh Options Available

• Standard Mesh: 3.5mm x 3.5mm aluminium mesh designed for general leaf and debris protection.
• Premium Mesh: Uses the same 3.5mm x 3.5mm aperture as Standard Mesh but is manufactured from thicker aluminium. At 0.80mm thick, Premium Mesh is approximately 46% thicker than Standard Mesh for increased durability.
• Fine Mesh: 1.8mm x 1.8mm woven aluminium mesh. Fine Mesh is the only BAL-rated mesh option in the Leaf Stopper range.

Helps Reduce Gutter Maintenance

No gutter guard system is completely maintenance-free. However, DEKGUARD helps reduce how often gutter cleaning is required by limiting leaves, twigs and debris entering the gutter.

This can be especially useful on patios, pergolas and outdoor living areas where leaves and debris can quickly accumulate.

Learn more about the benefits of gutter guards.

For a broader understanding of gutter protection systems, read our guide on what gutter guard is and how it works.

Improve Gutter Access with EasyAc

For easier gutter inspection and cleaning, consider adding an EasyAc gutter access panel.

EasyAc allows easier access for inspecting and flushing gutters without removing large sections of mesh.

Learn More About DEKGUARD

Visit the DEKGUARD information page to learn more about the patented Gripit fastening system and compatible roof profiles.

Frequently Asked Questions

Will DEKGUARD fit Lysaght Flatdek II roofs?

Yes. This DEKGUARD kit is specifically designed to suit Lysaght Flatdek II roof profiles.

What are the Flatdek II profile dimensions?

Flatdek II has a nominal rib height of 45mm and cover width of 620mm. :contentReference[oaicite:2]{index=2}

How many Gripits does Flatdek II require?

Flatdek II requires approximately 10 Gripits per metre. The correct quantity is automatically calculated when this roof profile is selected.

Can I install gutter guard on a Flatdek II patio roof?

Yes. DEKGUARD has been designed specifically for flat-based roof profiles such as Flatdek II commonly used on patios, verandahs and carports.

Can standard corrugated gutter guard be installed on Flatdek II?

Traditional corrugated roof gutter guard systems are generally unsuitable for Flatdek II because the profile does not use conventional corrugations. DEKGUARD uses Gripits designed specifically for flat-based roof profiles.

Can I install DEKGUARD myself?

Yes. DEKGUARD kits are suitable for DIY installation if you are confident working safely at height and have the appropriate tools. Professional installation is also available through approved installers.

Do I still need to maintain my gutters after installing DEKGUARD?

Yes. DEKGUARD helps reduce debris entering the gutter, however periodic inspection and maintenance are still recommended.