Leaf Stopper DEK762 Kit

DEK-762™ Gutter Guard for Compatible Metal Roof Profiles

DEK-762™ is Leaf Stopper’s purpose-built gutter guard system for compatible ribbed metal roof profiles with the required DEK-762-style geometry.

It may suit compatible versions of popular Australian roof profiles such as Trimdek, Monoclad, Trimclad and Superdek. However, profile names and dimensions can vary between manufacturers, product generations and suppliers.

DEK-762™ is not a universal metal-roof gutter guard. Before ordering, compare your roof profile carefully with the image below and confirm that the rib shape, rib spacing and roof geometry are compatible with the supplied DEK Saddles.

When installed on a compatible roof, DEK-762™ helps reduce leaves, twigs, bark and other larger debris entering the gutter while allowing rainwater to pass through the aluminium Mesh Shield.

For homeowners, this can mean fewer extensive gutter-cleaning jobs, less repeated ladder work and greater confidence that the roofline is easier to inspect and maintain before storms, heavy leaf fall and bushfire season.

See How the DEK-762™ System Works

Watch this product overview to see how DEK-762™ Mesh Shield, saddles and gutter-edge components work together on a compatible ribbed metal roof.

Designed for Specific 762-Style Roof Profiles

DEK-762™ uses profile-specific DEK Saddles to secure Mesh Shield to the high points of compatible metal roof ribs.

At a traditional external gutter edge, Trimets fasten the outer edge of the mesh to the gutter using colour-matched hexagonal-head screws.

This creates an inclined protective surface between the roof and gutter edge. The system helps keep larger debris above the gutter channel, where it remains visible and can be cleared when required.

Dry leaves may move away from the surface under suitable wind conditions. Wet leaves, branches and compacted debris can remain on top of any gutter guard and should be removed during periodic maintenance.

Confirm Your Roof Before Ordering

DEK-762™ may suit compatible versions of roof profiles including:

• Trimdek
• Monoclad
• Trimclad
• Superdek
• Other metal roof profiles that match the required DEK-762 geometry

These names alone do not guarantee compatibility. Roof manufacturers can use different rib shapes, cover widths and profile dimensions under similar product descriptions.

If your roof has wide flat pans, an unusual rib shape or does not match the profile image, review the DEKGUARD™ system or confirm the correct Leaf Stopper product before purchasing.

Part of the Leaf Stopper Roof Protection System Family

Leaf Stopper is a family of profile-specific gutter guard systems rather than one universal mesh product.

• CORROGUARD®: Traditional curved corrugated metal roofs
• TILEGUARD™: Compatible concrete and terracotta tiled roofs
• DEK-762™: Compatible DEK-762-style ribbed metal roofs
• DEKGUARD™: Supported flat-based metal roof profiles
• COMGUARD™: Internal box gutters adjoining supported flat-based roof profiles

Choosing the correct system matters because each roof profile requires an appropriate roof-side fixing method and compatible components.

How Leaf Stopper Mesh Shield Works

Mesh Shield forms the protective surface across the gutter. It helps reduce larger leaves, twigs and debris entering the drainage channel while allowing rainwater to pass through the mesh apertures.

Water performance still depends on factors including rainfall intensity, roof pitch, gutter capacity, gutter fall, downpipe condition and downstream stormwater infrastructure.

Watch the Mesh Shield Overview

Choose the Right Mesh Shield

Available Mesh Shield options may vary according to the selected kit and colour.

Standard Mesh

• Aperture: 3.5mm × 3.5mm
• Aluminium thickness: 0.55mm
• Best suited to: General leaves, twigs and larger debris
• Material: Non-combustible aluminium

Premium Mesh

• Aperture: 3.5mm × 3.5mm
• Aluminium thickness: 0.80mm
• Best suited to: Installations where a thicker, stronger mesh is preferred
• Material: Non-combustible aluminium

Premium Mesh has the same aperture as Standard Mesh but uses aluminium that is approximately 46% thicker. It is not a finer-aperture mesh.

Fine Mesh

• Aperture: 1.8mm × 1.8mm woven mesh
• Aluminium thickness: 0.40mm
• Best suited to: Pine needles, fine seeds and smaller leaf matter
• Material: Non-combustible aluminium
• Bushfire applications: The BAL-rated Mesh Shield option within the Leaf Stopper range

Where Fine Mesh is intended to perform an ember-guard function, confirm the applicable material, aperture and installation requirements with your builder, building certifier or bushfire consultant. Selecting Fine Mesh alone does not establish whole-building BAL compliance.

What Comes in a DEK-762™ Gutter-Edge Kit?

A DEK-762™ gutter-edge kit includes the components required to protect a compatible traditional external gutter beside a matching metal roof profile.

• 250mm-wide aluminium Mesh Shield roll in your selected mesh type and kit length
• Trimets to secure Mesh Shield to the compatible gutter edge
• DEK Saddles to fasten Mesh Shield to the tops of the compatible roof ribs
• Colour-matched hexagonal-head screws for the Trimets and saddles
• One free socket with each total purchase for use with the supplied screws

Always follow the current installation instructions for saddle positioning and component spacing. Do not rely on a universal “every second” or “every third” rib rule.

What Comes in a DEK-762™ Valley Kit?

DEK-762™ valley kits are supplied separately where protection is required for a compatible metal-roof valley.

• 250mm-wide aluminium Mesh Shield roll in your selected mesh type and kit length
• DEK Saddles to fasten Mesh Shield to the tops of the compatible roof ribs
• Colour-matched hexagonal-head screws for the saddles
• Trimets are not required for the valley installation

Valleys can carry concentrated water flow and may involve complex flashing, roof junctions or existing drainage issues. Damaged, leaking or unusually configured valleys should be assessed by a roofing professional before gutter guard is installed.

Protection That Supports Safer, Easier Home Maintenance

Cleaning exposed gutters can require repeated ladder use and working close to roof edges. This can become increasingly difficult for older homeowners, people living alone and families who want to spend less time managing roof maintenance.

DEK-762™ helps reduce the amount of larger debris entering the gutter, which may reduce how frequently extensive cleaning is required.

It does not make the gutter maintenance-free, but it can make ongoing care more manageable by:

• Keeping larger leaves and twigs above the gutter channel
• Making surface debris easier to identify
• Reducing concealed leaf accumulation inside the gutter
• Supporting easier inspection of the roofline
• Reducing the need to remove temporary gutter inserts
• Providing greater peace of mind before storms and heavy leaf fall

Suitable for a Range of Australian Properties

DEK-762™ may be suitable for compatible ribbed-metal-roof properties affected by:

• Nearby trees and seasonal leaf fall
• Wind-blown leaves, bark and twigs
• Pine needles, seeds and smaller debris when Fine Mesh is selected
• Regular storms and heavy rainfall
• Rainwater harvesting systems
• Bushfire-prone surroundings
• Recurring gutter-cleaning requirements
• Birds or pests attempting to access the protected gutter edge

A correctly installed system may help reduce access around the protected roof and gutter edge. It cannot guarantee complete bird or vermin exclusion throughout the roof or building.

Supporting Rainwater Harvesting

DEK-762™ can provide an initial layer of debris reduction for homes collecting roof water in rainwater tanks.

By helping reduce larger organic material entering the gutter, the system may reduce the load placed on downstream screens and filters.

It does not replace:

• First-flush diverters
• Tank inlet screens
• Appropriate filtration
• Tank maintenance
• Water-quality treatment required for the intended use

No Gutter Guard Is Maintenance-Free

DEK-762™ is designed to reduce gutter maintenance—not eliminate it.

Fine dust, pollen, silt and small particles may pass through the Mesh Shield and settle inside the gutter. Leaves and branches can also remain on the surface, particularly when wet or caught around roof features.

Periodic inspection remains important to check:

• The surface of the Mesh Shield
• Downpipe entrances
• Gutter corners and ends
• Roof valleys
• Visible saddles, screws and Trimets
• Hip and ridge terminations
• Fine sediment inside the gutter
• Damage following storms or other roof work

The appropriate inspection frequency depends on surrounding vegetation, weather, roof design and local conditions.

Plan Future Access with EasyAc®

You may not need direct gutter access for years. However, including a removable access point during the original installation means it is already available when an inspection or cleaning task eventually arises.

The EasyAc® range provides screw-free local access through the Mesh Shield without requiring a long section of DEK-762™ to be removed.

Steel EasyAc®

• The original EasyAc® model introduced in 2010
• Manufactured from steel
• Uses a louvered lid that slides onto the base plate from one end

EasyAc20®

• Released in 2025
• Longer than the original Steel EasyAc®
• Manufactured from aluminium
• Available in a range of colours
• The lid is positioned beside the slotted tabs and pushed sideways into place

Both models use patented internal tabs that are pushed underneath the Mesh Shield to hold the base plate in place. The removable lid does not rely on screws, so a screwdriver is not required each time it is removed or replaced.

EasyAc® may provide useful local access near selected downpipe outlets, corners and other maintenance points. It cannot automatically clear a blockage further down the downpipe or within underground stormwater infrastructure.

DEK-762™ Installation Instructions

DEK-762™ can be installed by capable DIY customers on straightforward, compatible and safely accessible metal roofs.

Professional installation is recommended where the building is high, steep, complex or difficult to access, or where roof-profile compatibility is uncertain.

Always use appropriate height-safety equipment and follow the current metal-roof installation instructions.

Watch the Metal Roof Installation Video

This video demonstrates the general Leaf Stopper metal-roof installation process. Use it together with the written instructions and ensure the DEK Saddles are suitable for your exact roof profile.

Download the Metal Roof Installation Guide

Download the Leaf Stopper Metal Roof Installation Guide

Silicone Requirements

Silicone is not included with the DEK-762™ kit.

A suitable silicone product may be required where Mesh Shield is secured around hip corners or at the upper ends of ridge sections, as shown in the current installation instructions.

Confirm that the selected sealant is suitable for the roof material, coating and exposure conditions.

Typical Installation Tools and Materials

• Suitable drill
• Metal-cutting snips
• Measuring tape
• Appropriate ladder and height-safety equipment
• Gloves and suitable personal protective equipment
• Suitable silicone for specified hip and ridge details

One socket for the supplied hexagonal-head screws is included with each total purchase.

Delivery Information

Delivery is free when ordering a minimum 10-metre Leaf Stopper kit.

A physical delivery address must be provided. There is no pickup option, and delivery cannot be made to a P.O. Box.

Why Choose DEK-762™?

• Purpose-built for compatible DEK-762-style ribbed metal roofs
• May suit compatible Trimdek, Monoclad, Trimclad and Superdek profiles
• Uses profile-specific DEK Saddles secured to the roof ribs
• Uses 250mm aluminium Mesh Shield
• Available with Standard, Premium or Fine Mesh options where offered
• Helps reduce leaves and larger debris entering the gutter
• May reduce the frequency of extensive gutter cleaning
• Available with colour-matched components
• Suitable for capable DIY installation or professional installation
• Can be combined with EasyAc® for planned maintenance access
• Part of the wider Leaf Stopper system family for Australian roofs

A Long-Term Approach to Metal-Roof Gutter Protection

DEK-762™ is designed for homeowners who want more than a temporary gutter insert. It combines aluminium Mesh Shield with roof-profile-specific saddles and compatible gutter-edge components.

The result is an inspectable gutter-protection system that helps reduce larger debris entering the gutter while supporting easier long-term roof maintenance.

By confirming your roof profile, selecting the appropriate Mesh Shield, following the current installation instructions and planning future access with EasyAc®, you can create a more manageable roof-maintenance system for your home.

Frequently Asked Questions

What roofs does DEK-762™ suit?

DEK-762™ is designed for compatible ribbed metal roof profiles that match the required profile image and saddle geometry. It may suit compatible Trimdek, Monoclad, Trimclad and Superdek profiles, but the profile name alone does not guarantee compatibility.

How can I tell whether my roof is compatible?

Compare the rib shape, rib spacing, pan design and overall geometry of your roof with the DEK-762™ profile image. Confirm compatibility before ordering if the roof manufacturer or exact profile is uncertain.

Is DEK-762™ suitable for every Trimdek roof?

No. Profiles can vary between manufacturers and product generations. The actual roof geometry must match the requirements of the DEK Saddles.

What should I use if my roof does not match DEK-762™?

A supported flat-based metal roof may require DEKGUARD™. Traditional curved corrugated roofs generally require CORROGUARD®. Confirm the exact roof profile before selecting a system.

How is DEK-762™ secured to the roof?

DEK Saddles fasten the Mesh Shield to the tops of compatible roof ribs. For gutter-edge installations, Trimets secure the outer edge of the mesh to the compatible gutter.

What comes in the gutter-edge kit?

The gutter-edge kit includes 250mm-wide Mesh Shield, Trimets, DEK Saddles and colour-matched hexagonal-head screws in quantities appropriate to the selected kit.

What comes in the valley kit?

The valley kit includes 250mm-wide Mesh Shield, DEK Saddles and colour-matched screws. Trimets are not required for the valley installation.

Do I receive a socket with my purchase?

Yes. One free socket is supplied with each total purchase for use with the supplied hexagonal-head screws.

Is silicone included?

No. Silicone is not included. A suitable silicone may be required at specified hip corners and upper ridge terminations, as shown in the installation instructions.

Can I install DEK-762™ myself?

Capable DIY customers may install DEK-762™ on a straightforward, compatible and safely accessible metal roof. Professional installation is recommended for high, steep, complex or difficult-to-access buildings.

How much DEK-762™ do I need?

Measure the total linear length of the external gutters and compatible valleys you want to protect. Measure each separate run and allow for joins, corners and installation details shown in the current instructions.

Does DEK-762™ completely stop gutter cleaning?

No. DEK-762™ helps reduce larger debris entering the gutter, but fine sediment and surface debris may still require periodic inspection and cleaning.

Can I flush the gutter through Mesh Shield?

Water may be directed through the Mesh Shield to help move loose fine sediment. For more direct local access, consider installing Steel EasyAc® or EasyAc20® during the original installation.

Which Mesh Shield should I choose for pine needles?

Fine Mesh is generally the most appropriate Leaf Stopper option for pine needles, fine seeds and smaller leaf matter because it has a 1.8mm × 1.8mm woven aperture.

Is DEK-762™ suitable for bushfire-prone properties?

All Leaf Stopper Mesh Shield options are made from non-combustible aluminium. Fine Mesh is the BAL-rated option within the range. Confirm the exact gutter-guard and ember-protection requirements for your property with the appropriate building or bushfire professional.

Does DEK-762™ stop birds and pests?

A correctly installed system may help reduce access around the protected roof and gutter edge. It cannot guarantee complete bird or vermin exclusion throughout the roof or building.

Will DEK-762™ prevent every gutter blockage or overflow?

No gutter guard can guarantee this. Drainage performance also depends on gutter fall, gutter capacity, downpipe condition, rainfall intensity, overflow provisions and downstream stormwater infrastructure.

Can DEK-762™ repair a damaged or poorly draining gutter?

No. Existing corrosion, incorrect gutter fall, leaking joins, blocked downpipes and undersized drainage should be addressed before the gutter guard is installed.

Can I still inspect my gutters after installation?

Yes. The gutter, valleys and Mesh Shield should remain part of your periodic roof inspection. Adding an EasyAc® access panel can provide removable local access without taking out a long section of mesh.

Is EasyAc® included in the DEK-762™ kit?

No. Steel EasyAc® and EasyAc20® are optional access products sold separately.

Is delivery free?

Delivery is free when the order includes a minimum 10-metre Leaf Stopper kit. A physical delivery address is required, and delivery cannot be made to a P.O. Box.