Leaf Stopper DEKGUARD - Metroll - Hi-Deck 650

Gutter Guard for Metroll Hi-Deck 650 Roofs

LeafStopper DEKGUARD is a gutter guard system designed specifically for Metroll Hi-Deck 650 metal roof profiles.

The DEKGUARD system uses the purpose-designed Gripit fastening system to secure the Mesh Shield to the flat section of the roof profile where traditional corrugated roof saddles are not suitable.

This product is designed to suit the Metroll Hi-Deck 650 roof profile with a 50mm rib height and 650mm cover width.

If your Colorbond® roof uses the Hi-Deck 650 profile, this DEKGUARD kit has been designed specifically for that roof shape.

Compatible Roof Profile

This DEKGUARD kit is compatible with:

• Manufacturer: Metroll
• Roof Profile: Hi-Deck 650
• Rib Height: 50mm
• Cover Width: 650mm

If you are unsure whether your roof profile matches these specifications, compare your roof measurements with the dimensions above before ordering.

Why Hi-Deck 650 Requires DEKGUARD

Metroll Hi-Deck 650 is a concealed-fix metal roof profile featuring wide flat pans and raised ribs. This profile is commonly used on residential, commercial and industrial buildings throughout Australia.

The shape of the Hi-Deck 650 profile means traditional corrugated roof gutter guard systems are generally unsuitable because corrugated saddles are designed for curved roof sheets.

Unlike corrugated roof gutter guard systems that use roof saddles fixed over corrugation ribs, DEKGUARD uses the patented Gripit fastening system designed specifically for flat-based roof profiles.

Gripits secure the Mesh Shield to the flat section of the roof profile, helping create a secure installation while maintaining effective rainwater flow into the gutter.

Watch: DEKGUARD System Overview

This video explains how the DEKGUARD gutter guard system works on compatible flat-based metal roof profiles.

Watch: How the Gripit Fastening System Works

The Gripit fastening system was specifically developed by Leaf Stopper for roof profiles where traditional corrugated saddles cannot be used.

Watch: DEKGUARD Installation Guide

This installation video provides a general overview of how DEKGUARD is installed using the Gripit fastening system.

What Comes in the DEKGUARD Kit?

• 250mm wide aluminium Mesh Shield roll in your selected kit length and selected Mesh Shield option (Standard, Premium or Fine Mesh)
• Trimets – used to connect the mesh to the gutter edge using hexagonal head screws
• Gripit brackets – the quantity required for Hi-Deck 650 is automatically calculated when this roof profile is selected
• Colour-matched screws to match the Trimets and Gripits
• 1 free socket included with your order for hexagonal head screws

Mesh Options Available

• Standard Mesh: 3.5mm x 3.5mm aluminium mesh designed for general leaf and debris protection.
• Premium Mesh: Uses the same 3.5mm x 3.5mm aperture as Standard Mesh but is manufactured from thicker aluminium. At 0.80mm thick, Premium Mesh is approximately 46% thicker than Standard Mesh for increased durability.
• Fine Mesh: Designed to help reduce entry of smaller debris and is the only BAL-rated mesh option in the Leaf Stopper range.

Helps Reduce Gutter Maintenance

No gutter guard system is completely maintenance-free. However, DEKGUARD helps reduce how often gutter cleaning is required by limiting the amount of leaves, twigs and debris entering the gutter.

This can be especially useful on Hi-Deck 650 roofs exposed to nearby trees, heavy rainfall and wind-blown debris.

You can also read our guide on the benefits of gutter guards.

For a broader understanding of how gutter guard systems work, see our guide to gutter guards.

Improve Gutter Access with EasyAc

For easier gutter inspection and cleaning, many customers also install an EasyAc gutter access panel.

EasyAc allows you to inspect and flush gutters more easily without removing large sections of mesh.

Learn More About DEKGUARD

To learn more about the DEKGUARD system and compatible roof profiles, visit the DEKGUARD information page.

Delivery Information

Delivery is free when ordering a minimum 10 metre Leaf Stopper kit.

Please provide a physical delivery address. We are unable to deliver to P.O. Boxes.

Frequently Asked Questions

Will DEKGUARD fit Metroll Hi-Deck 650 roofs?

Yes. This DEKGUARD kit is specifically designed to suit Metroll Hi-Deck 650 metal roof profiles.

What are the Hi-Deck 650 profile dimensions?

The profile has an approximate rib height of 50mm and cover width of 650mm.

Can I install gutter guard on a Hi-Deck 650 Colorbond® roof?

Yes. DEKGUARD has been designed specifically for flat-based metal roof profiles such as Hi-Deck 650 commonly used in Colorbond® roofing systems.

Why does Hi-Deck 650 require Gripits?

The profile has wide flat pans and raised ribs, making traditional corrugated saddles unsuitable. Gripits secure the mesh to the flat section of the roof profile.

How do I identify a Hi-Deck 650 roof profile?

Check the roof profile dimensions. Hi-Deck 650 has an approximate 50mm rib height and 650mm cover width with wide flat pans between ribs.

Can I install DEKGUARD myself?

Yes. DEKGUARD kits are suitable for DIY installation if you are confident working safely at height and have the correct tools. Professional installation is also available through approved installers.

Do I still need to maintain my gutters after installing DEKGUARD?

Yes. DEKGUARD helps reduce debris entering the gutter, however periodic inspection and maintenance are still recommended.