Choosing gutter guard for a tile roof requires a different approach from protecting a corrugated or flat metal roof.
Concrete and terracotta roof tiles have shaped profiles, overlapping courses and roof valleys that all affect how gutter protection needs to be installed.
A good tiled-roof system should help reduce leaves, twigs and larger debris entering the gutter while fitting the roof without unnecessary drilling through the tiles.
Leaf Stopper TILEGUARD™ is designed specifically for compatible concrete and terracotta tiled roofs. At the gutter edge, it uses 500mm aluminium Mesh Shield secured to the gutter with Trimets and tucked beneath the second row of tiles. TILEGUARD™ also has a separate 750mm Mesh Shield configuration for roof valleys.
This guide explains how tiled-roof gutter guard works, which mesh to choose, how gutter-edge and valley protection differ, and what to consider before installing it yourself or using a professional.
Key Takeaways
- TILEGUARD™ is designed for compatible concrete and terracotta tiled roofs.
- Gutter-edge TILEGUARD™ uses 500mm Mesh Shield, Trimets and colour-matched screws.
- The Mesh Shield is tucked beneath the second row of tiles rather than mechanically fastened through the tiles.
- Some higher-profile tiles may require carefully positioned expansion cuts so the Mesh Shield follows the tile shape.
- TILEGUARD™ valley protection uses 750mm Mesh Shield and generally does not require Trimets or screws.
- Standard and Premium Mesh have the same 3.5mm × 3.5mm aperture; Premium is thicker, not finer.
- Fine Mesh uses a 1.8mm × 1.8mm aperture and is the BAL-rated Mesh Shield option within the Leaf Stopper range.
- No gutter guard makes a tiled-roof drainage system maintenance-free.
Why Tile Roofs Need a Specific Gutter Guard
Tiled roofs behave differently from metal roofs.
Concrete and terracotta tiles overlap in courses and can have significantly different profiles, ranging from relatively low-profile tiles to deeply shaped designs.
This affects how Mesh Shield transitions from the roof towards the gutter.
A generic system designed for a metal roof should not simply be adapted to tiled roofing.
The gutter guard needs to work with:
- The tile profile
- The overlapping tile courses
- The roof pitch
- The gutter-edge configuration
- Roof valleys
- Hips and ridges
- The condition of the existing tiles
Leaf Stopper therefore uses a dedicated tiled-roof system: TILEGUARD™.
How Does TILEGUARD™ Work on a Tiled Roof?
TILEGUARD™ creates a Mesh Shield between the roof and the external gutter edge.
At a compatible gutter edge, the system uses:
- 500mm-wide aluminium Mesh Shield
- Interlocking Trimets
- Colour-matched screws
The gutter-side edge of the Mesh Shield is secured to the gutter using Trimets.
The roof-side section is formed to suit the tile profile and tucked beneath the second row of tiles.
This allows Mesh Shield to cover the gutter opening while remaining integrated with the tiled roof.
Does TILEGUARD™ Use Tile Clips?
No.
TILEGUARD™ should not be described as using specialised clips that grip the edges of individual roof tiles.
The current system uses Mesh Shield tucked beneath the appropriate tile course and Trimets at the compatible gutter edge.
There is therefore generally no need to drill through individual tiles as part of the standard gutter-edge installation.
What Is the “Ski-Slope” Gutter Guard Design?
Leaf Stopper describes its roof-to-gutter configuration as a ski-slope system.
The idea is straightforward: instead of placing a guard inside the gutter channel, the Mesh Shield extends from the roof towards the outside edge of the gutter.
This keeps larger debris above the gutter channel rather than allowing it to settle directly inside.
Dry leaves may move away from the Mesh Shield under suitable wind and weather conditions.
However, it is not accurate to call any gutter guard completely self-cleaning.
Wet leaves, branches and other material can remain on top of Mesh Shield and may still require periodic attention.
TILEGUARD™ Gutter Edge vs Valley Protection
This distinction is important because TILEGUARD™ uses different configurations for the gutter edge and roof valleys.
TILEGUARD™ Gutter Edge
A current gutter-edge kit includes:
- 500mm Mesh Shield
- Trimets
- Colour-matched screws
The Trimets secure Mesh Shield along the compatible front gutter edge.
TILEGUARD™ Valley
Roof valleys concentrate water and debris from adjoining roof sections.
For separate tiled-roof valley protection, TILEGUARD™ uses:
- 750mm Mesh Shield
Trimets and screws are generally not required for the TILEGUARD™ valley configuration.
Do not confuse this with CORROGUARD® or DEK-762™ valley installations, which use different components.
Why Is the Valley Mesh Wider?
The 750mm Mesh Shield provides additional width for the different geometry of tiled-roof valley applications.
Valleys can involve complex roof junctions and concentrated water flow, so damaged or unusual valleys should be assessed before covering them with mesh.
Choosing Mesh for a Tile Roof
TILEGUARD™ can be configured with Leaf Stopper's available Mesh Shield options.
Standard Mesh
- Aperture: 3.5mm × 3.5mm
- Thickness: 0.55mm aluminium
- Material: Non-combustible aluminium
- Typical use: General leaves, twigs and larger debris
Premium Mesh
- Aperture: 3.5mm × 3.5mm
- Thickness: 0.80mm aluminium
- Difference: Approximately 46% thicker than Standard Mesh
- Material: Non-combustible aluminium
Premium Mesh does not have smaller holes than Standard Mesh.
Its main difference is the thicker aluminium material.
Fine Mesh
- Aperture: 1.8mm × 1.8mm woven mesh
- Thickness: 0.40mm aluminium
- Typical use: Pine needles, fine seeds and smaller debris
- Bushfire applications: Leaf Stopper's BAL-rated Mesh Shield option where applicable
Which One Should You Choose?
Choose according to the actual material surrounding your property rather than assuming the most expensive or finest mesh is automatically best.
Consider:
- Leaf size
- Pine needles
- Seeds and blossom
- Desired mesh strength
- Bushfire requirements where applicable
- Available colours
Does TILEGUARD™ Work on Concrete and Terracotta Roofs?
TILEGUARD™ is designed for both compatible concrete and terracotta tiled roofs.
The more important question is the tile profile and condition.
Some tiles have a relatively shallow profile, while others have deeper curves.
Leaf Stopper advises that some higher-profile shaped tiles require additional care and expansion cuts in the Mesh Shield so it can conform properly to the roof.
Do not invent a universal expansion-cut pattern.
Follow the current Leaf Stopper installation instructions for the particular detail.
Older Terracotta Tiles Need Extra Care
Older tiles can become brittle with age.
Before beginning a DIY installation, inspect the tiles around the gutter edge and planned work area.
Cracked, loose or damaged tiles should be dealt with separately rather than simply covered by gutter protection.
How Is Gutter Guard Installed on a Tile Roof?
The basic TILEGUARD™ gutter-edge process is:
- Prepare the gutters and roof edge. Remove significant existing debris and inspect the gutter and accessible tile area.
- Roll out the Mesh Shield. Position the 500mm Mesh Shield along the gutter run.
- Secure the gutter edge. Use the supplied Trimets and screws at the compatible gutter edge.
- Form the mesh to the roof. Carefully make expansion cuts where required to accommodate the tile profile.
- Tuck the Mesh Shield beneath the second row of tiles.
- Finish corners, hips and roof junctions according to the current installation instructions.
Do not rely on generic online instructions for exact cut locations, screw spacing, overlaps or corner details.
Use the current Leaf Stopper installation information supplied for TILEGUARD™.
Does TILEGUARD™ Require Silicone?
Silicone is not included in the standard TILEGUARD™ kit.
Leaf Stopper's current product information states that silicone may be required when securing Mesh Shield around hip corners or at the tops of ridges.
Whether it is required depends on the actual roof configuration.
Watch the TILEGUARD™ Installation Guide
Can You Install Gutter Guard on a Tile Roof Yourself?
TILEGUARD™ can be suitable for DIY installation where the roof is straightforward and can be accessed safely by a capable person.
Tiled roofs introduce some additional considerations compared with working beside many metal roofs.
Tiles can be:
- Fragile
- Slippery when damp
- Difficult to walk on safely
- Easy to damage through poor foot placement
A professional installer is generally the better option where the roof is:
- High
- Steep
- Multi-storey
- Complex
- Fragile
- Difficult to access
- Built with numerous valleys, hips or unusual junctions
Reducing gutter-cleaning frequency may reduce repeated exposure to ladder and roof work, but installing gutter guard still involves working at height.
If you're comparing the two approaches, read our DIY vs Professional Gutter Guard Installation Guide.
Will Installing TILEGUARD™ Void a Roof-Tile Warranty?
Do not assume any gutter guard installation automatically preserves an existing roof warranty.
Warranty terms vary between:
- Tile manufacturers
- Roofing contractors
- Installation systems
- Building products
TILEGUARD™ does not normally require drilling through the tiles themselves as part of the standard gutter-edge installation, but you should still review any applicable roof or tile warranty conditions before undertaking modifications around a warranted roof.
Can Gutter Guard Help with Birds Around a Tiled Roof?
A correctly installed TILEGUARD™ system may help reduce access around the protected gutter and tiled roof edge.
However, it should not be marketed as making a tiled roof bird-proof or vermin-proof.
Birds and other animals may gain access through:
- Broken tiles
- Eaves
- Roof vents
- Damaged flashing
- Other openings around the building
Mesh aperture is also not usually the deciding factor for common bird exclusion: even Leaf Stopper Standard Mesh has openings of only 3.5mm × 3.5mm.
If pest access is one of your main concerns, read our guide to bird proofing gutters with gutter guard.
What About Gutter Guard on a Tile Roof in a Bushfire-Prone Area?
Leaf Stopper Mesh Shield is manufactured from aluminium and is non-combustible.
However, the three Mesh Shield options do not have identical bushfire status.
- Standard: non-combustible, not the BAL-rated option.
- Premium: non-combustible, not the BAL-rated option.
- Fine: Leaf Stopper's BAL-rated Mesh Shield option where applicable.
Fine Mesh alone does not make a tiled home BAL compliant.
Requirements depend on:
- The property's assessed BAL
- The building element being protected
- The applicable construction requirements
- Installation details
- Jurisdiction
If the gutter protection forms part of a specific bushfire construction requirement, confirm the specification with the relevant builder, certifier or bushfire consultant.
For a broader explanation, visit the Leaf Stopper Bushfire Protection page.
Does TILEGUARD™ Prevent Gutter Overflow?
No gutter guard can guarantee that a tiled-roof gutter will never overflow.
TILEGUARD™ helps reduce leaves and larger debris entering the gutter, but drainage also depends on:
- Rainfall intensity
- Roof catchment
- Roof pitch
- Gutter dimensions
- Gutter fall
- Downpipe capacity
- Overflow provisions
- Downstream stormwater
- Surface debris on the Mesh Shield
Gutter guard does not repair an inadequate or defective drainage system.
Do You Still Need to Clean Gutters with TILEGUARD™?
Periodic inspection remains important.
TILEGUARD™ can help reduce larger debris entering the gutter, but:
- Fine sediment may pass through the Mesh Shield
- Dust and pollen can accumulate
- Wet leaves can remain on the mesh surface
- Branches may lodge around roof features
- Valleys may need attention
- Downpipe entrances may still need inspection
There is no single maintenance interval appropriate for every tiled roof.
Inspection frequency should reflect the surrounding vegetation, local weather, roof complexity and previous maintenance history.
Read Do You Still Have to Clean Gutters with Gutter Guards? for a detailed explanation.
Can EasyAc® Be Used with TILEGUARD™?
EasyAc® is an optional gutter access product that can provide local inspection access through a compatible Mesh Shield installation.
It may be useful where future access near a selected downpipe or other maintenance location is desirable.
EasyAc® is not automatically included with standard TILEGUARD™ kits.
It also does not make the entire gutter accessible from one location or guarantee that deeper downpipe or underground stormwater blockages can be cleared.
What Should You Measure Before Ordering TILEGUARD™?
Start with more than just the total number of metres around the house.
Record:
- Total length of each external gutter run
- Separate tiled-roof valley lengths
- Concrete or terracotta tile type
- Tile profile
- Condition of tiles around the gutter edge
- Corners and hips
- Downpipe locations
- Mesh Shield preference
- Colour preference
- Potential EasyAc® access locations
Do not combine the valley measurement with the external gutter-edge measurement when ordering components, because the configurations are different.
Our How to Measure for Gutter Guards guide walks through the process in more detail.
What's Included in a TILEGUARD™ Kit?
Gutter Edge Kit
- 500mm Mesh Shield in the selected length and Mesh Shield option
- Trimets
- Colour-matched screws
Valley Kit
- 750mm Mesh Shield in the selected length and Mesh Shield option
Trimets and screws are generally not required for the tiled-roof valley kit.
Leaf Stopper currently also supplies one socket with the overall order for use with the supplied hex-head screws where applicable.
Silicone is not included and may be required around hip corners or the tops of ridges.
Always check the current TILEGUARD™ product listing before ordering because product inclusions and colour availability can change.
So, What Is the Best Gutter Guard for a Tile Roof?
For a compatible concrete or terracotta tiled roof, the best gutter guard is one specifically configured for tiled roofing rather than adapted from a generic metal-roof system.
With TILEGUARD™, the main choices are:
- Gutter edge or valley application
- Standard, Premium or Fine Mesh Shield
- Required length
- Colour
- DIY or professional installation
- Whether future EasyAc® access is useful
For most properties, the surrounding debris type and actual roof configuration are more useful selection criteria than claims such as "premium", "self-cleaning" or "maintenance-free".
If you want to compare TILEGUARD™ against the other Leaf Stopper roof systems, read the Complete Guide to Gutter Guard Kits for Australian Roofs.
When you're ready to choose a tiled-roof system, visit the TILEGUARD™ information page, shop Leaf Stopper online or find a professional installer.
Frequently Asked Questions
Can you put gutter guard on a tile roof?
Yes. TILEGUARD™ is Leaf Stopper's system for compatible concrete and terracotta tiled roofs.
How does TILEGUARD™ attach to roof tiles?
The Mesh Shield is formed to suit the tile profile and tucked beneath the second row of tiles. It is secured to the compatible gutter edge using Trimets and screws rather than tile clips.
Does TILEGUARD™ require drilling into roof tiles?
Drilling through individual roof tiles is not part of the standard TILEGUARD™ gutter-edge installation described by Leaf Stopper. Always follow the current instructions for the specific roof configuration.
How wide is TILEGUARD™ mesh?
Current TILEGUARD™ gutter-edge kits use 500mm Mesh Shield. Tiled-roof valley kits use 750mm Mesh Shield.
Does TILEGUARD™ protect roof valleys?
Yes. A separate 750mm-wide TILEGUARD™ Mesh Shield configuration is available for compatible tiled-roof valleys.
Do TILEGUARD™ valleys use Trimets?
Generally no. Current TILEGUARD™ valley kits contain 750mm Mesh Shield and do not require Trimets or screws.
What is the best mesh for a tiled roof?
It depends on the debris and project requirements. Standard Mesh suits general leaves and larger debris, Premium provides a thicker mesh with the same aperture, and Fine Mesh provides a smaller aperture for finer debris and applicable BAL-rated applications.
Is Fine Mesh required for every tiled roof in a bushfire area?
No. The correct specification depends on the property's assessed BAL, the building element and applicable construction requirements.
Will TILEGUARD™ stop birds getting into my roof?
It may help reduce access around the protected gutter and roof edge, but it cannot guarantee complete bird or pest exclusion throughout the building.
Can I install TILEGUARD™ myself?
It may be suitable for competent DIY installation on a straightforward, safely accessible tiled roof. High, steep, fragile or complicated roofs are better suited to an appropriately equipped professional.
Do gutters still need maintenance after TILEGUARD™ is installed?
Yes. Leaf Stopper helps reduce larger debris entering the gutter, but fine sediment and surface debris can still require periodic inspection and maintenance.